【求助】openEuler安装的时候报错“/lib/dracut/hooks/initqueue/timeout/50-anaconda-error-reporting.sh: line 19: /run/anaconda/initrd_errors.txt: No such file or directory”

[ OK ] Finished Wait for udev To Complete Device Initialization.
Starting Device-Mapper Multipath Device Controller…
[ OK ] Started Device-Mapper Multipath Device Controller.
[ OK ] Reached target Preparation for Local File Systems.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories…
[ OK ] Finished Create Volatile Files and Directories.
[ OK ] Reached target System Initialization.
[ OK ] Reached target Basic System.
[ 17.314802][ C3] random: crng init done
[ 18.784387][ T36] scsi 0:0:0:0: Direct-Access hp x778w PMAP PQ: 0 ANSI: 6
[ 18.793607][ T76] sd 0:0:0:0: [sdb] 121061376 512-byte logical blocks: (62.0 GB/57.7 GiB)
[ 18.802175][ T76] sd 0:0:0:0: [sdb] Write Protect is off
[ 18.807877][ T76] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn’t support DPO or FUA
[ 18.819530][ T76] sdb: sdb4
[ 18.822671][ T76] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[ 145.667783] dracut-initqueue[926]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 145.669052] dracut-initqueue[926]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: “[ -e “/dev/root” ]”
[ 145.670681] dracut-initqueue[926]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: “[ -f /tmp/settle.done ]”
[ 145.672990] dracut-initqueue[926]: Warning: dracut-initqueue: starting timeout scripts
[ 145.673137] dracut-initqueue[926]: Warning: ############# Anaconda installer errors begin #############
[ 145.673186] dracut-initqueue[926]: Warning: # #
[ 145.673235] dracut-initqueue[926]: Warning: It seems that the boot has failed. Possible causes include
[ 145.673273] dracut-initqueue[926]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 145.673323] dracut-initqueue[926]: Warning: kernel cmdline. Please verify that you have specified
[ 145.673362] dracut-initqueue[926]: Warning: inst.stage2 or inst.repo.
[ 145.673409] dracut-initqueue[926]: Warning: Please also note that the ‘inst.’ prefix is now mandatory.
[ 145.673447] dracut-initqueue[926]: Warning: # #
[ 145.673484] dracut-initqueue[926]: Warning: #### Installer errors encountered during boot: ####
[ 145.673532] dracut-initqueue[926]: Warning: # #
[ 145.673571] dracut-initqueue[926]: /lib/dracut/hooks/initqueue/timeout/50-anaconda-error-reporting.sh: line 19: /run/anaconda/initrd_errors.txt: No such file or directory
[ 145.673609] dracut-initqueue[926]: Warning: # #
[ 145.673646] dracut-initqueue[926]: Warning: ############# Anaconda installer errors end ###############
[ 147.336479] dracut-initqueue[926]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks:
[ 147.337738] dracut-initqueue[926]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: “[ -e “/dev/root” ]”
[ 147.339466] dracut-initqueue[926]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: “[ -f /tmp/settle.done ]”
[ 147.341731] dracut-initqueue[926]: Warning: dracut-initqueue: starting timeout scripts
[ 147.341861] dracut-initqueue[926]: Warning: ############# Anaconda installer errors begin #############
[ 147.341911] dracut-initqueue[926]: Warning: # #
[ 147.341959] dracut-initqueue[926]: Warning: It seems that the boot has failed. Possible causes include
[ 147.341998] dracut-initqueue[926]: Warning: missing inst.stage2 or inst.repo boot parameters on the
[ 147.342043] dracut-initqueue[926]: Warning: kernel cmdline. Please verify that you have specified
[ 147.342080] dracut-initqueue[926]: Warning: inst.stage2 or inst.repo.
[ 147.342127] dracut-initqueue[926]: Warning: Please also note that the ‘inst.’ prefix is now mandatory.
[ 147.342163] dracut-initqueue[926]: Warning: # #
[ 147.342199] dracut-initqueue[926]: Warning: #### Installer errors encountered during boot: ####

我安装时也遇到同样的问题,请问楼主后来解决了没有?怎么解决的?